Firewire-ljudkort med 8 in/ut.
Firewire-ljudkort med 4 combo-ingångar TRS/XLR med micpreamp och fantommatning, 4 TRS in, 8 TRS ut, 2st ADAT I/O för anslutning av externa omvandlare, S/Pdif eller AES/EBU I/O, inbyggd DSP-effektenhet etc
Sturdy lightweight construction ready to travel with you anywhere.
Compact size (14.75 × 9 inches) fits easily into a napsack, briefcase or computer bag and sits perfectly under any laptop.
Powered by computer* no additional power supply necessary for complete recording freedom.
Optional battery power standard field battery pack (sold separately) can be used for extended remote recording sessions and stand-alone operation as a complete digital mixer.
28 inputs / 30 outputs (at 44.1/48 kHz) there's no channel sharing in the Traveler-mk3. Mic inputs, TRS analog, AES/EBU, RCA S/PDIF and phones are all handled as separate channels.
Four combo jacks provide hi-Z 1/4 guitar input or low-Z XLR mic input with transparent preamps, phantom power, pad and plenty of gain.
Clip protection Mic/guitar input limiter prevents digital clipping and distortion from overloaded signal levels up to +12 dB over zero.
Individual 48V phantom power on each mic input mix and match microphones.
Four 24-bit 192kHz analog inputs and eight analog outputs on balanced/unbalanced 1/4" TRS jacks.
Digital Precision Trim adjust input gain in 1dB increments on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs). Fine-tune the balance of your analog inputs. Save and recall multiple trim setups.
High-resolution recording The Traveler-mk3 can operate all analog I/O at sample rates up to 192kHz.
Flexible optical I/O 16 channels of ADAT lightpipe, 8 channels of SMUX (96 kHz) or two pairs of stereo TOSLink. Mix and match formats between the two banks.
CueMix FX flexible 28 input/16 bus mixer with on-board DSP effects, including classic reverb with sends/returns, plus modeled EQ and vintage compression on every input and output.
Multiple CueMix FX mixes for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear with no latency.
Advanced audio signal analysis CueMix FX software provides real-time FFT and spectrogram "waterfall" displays for visual analysis of individual signals and entire mixes.
Front-panel control access your entire mix, or any Traveler-mk3 setting, directly from the front panel.
Stand-alone operation program your mixes at the studio and then bring the Traveler-mk3 to your gig no computer needed. Just plug in the included DC power adapter. Tweak settings using the back-lit LCD.
Sample-accurate MIDI connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
Expandable add additional interfaces for more I/O as your needs grow.
Compatible with the 8pre mic input expander connect the 8pre via optical for 8 more mic inputs at sample rates up to 96 kHz fully integrated into the Traveler-mk3's CueMix FX mixing environment.
Eight 24-bit 192kHz outputs on balanced/unbalanced 1/4" TRS jacks.
Phone jack with front panel volume control.
Stereo 24-bit 96kHz AES/EBU in/out.
Stereo 24-bit 96kHz S/PDIF in/out.
Word clock in and out.
Built-in SMPTE time code sync resolves to and generates time code. Allows you to directly resolve Digital Performer, Logic, Cubase, Nuendo and other compatible host software to time code with no additional synchronizer needed.
DC-coupled TRS outputs can be used with Volta (sold separately) to manipulate and sequence voltage-controlled modular synthesizers from a host DAW.
Plug-and-play operation with your Mac or PC via FireWire.
Includes native 32- and 64-bit drivers for Mac OS X and Windows 7/Vista/XP, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.
Supports all popular Mac and Windows audio software.
100% compatible with all host-based effects processing in today's popular audio programs.
Includes AudioDesk 3 full-featured sample-accurate workstation software for the Mac OS X with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
Plug-and-play operation with your Mac or PC via FireWire Two FireWire 400 ports allow for daisy-chaining without a hub. Works with a FireWire 800 connection via a simple adapter or FW400-to-800 cable.
Front panel volume control for monitoring. Stereo, Quad, 5.1, 7.1 and user-defined surround monitoring setups available.
Front panel meters or activity LEDs for all analog, digital and MIDI I/O, plus SMPTE sync, tach and lock LEDs.
Comprehensive level metering Front panel LCD provides vertical meters for entire banks (8 channels at once) or horizontal long-throw metering for individual channels. Meter banks are quickly accessible via the dedicated METERS rotary encoder on the front panel.
Dedicated front panel clock status LEDs.
Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 14.75 × 9 × 1.75 inches (37.47 × 22.86 × 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits standard 19 inch (48.26 cm) rack at 1U high.
*Bus power requires a non-adapted 6-pin FireWire port